Appliance brands we repair in Los Angeles

Twenty brands, sorted by how they behave when something breaks. Premium built-ins mean cabinetry work and ordered parts. Mass-market machines are cheap to fix, and cheap to walk away from at the wrong age.

10%

off labor

when you book online

Labor only. Parts are not discounted.

Tell us what broke

We'll call or text about this repair. Nothing else.

State registered and insured Same-day, 2-hour window Diagnostic credited

Premium and built-in brands

Built-in, integrated and professional equipment. Parts are ordered rather than picked up, the diagnosis takes longer, and the cabinet is usually worth more than the board that failed in it. Open a brand for its failure patterns and price bands.

Sub-Zero repair

Refrigeration, Wine storage, Ice makers

Parts are expensive and usually ordered rather than pulled off a shelf. The cabinets are built to run for decades, so a fifteen year old unit with a sealed system fault is still worth quoting. Replacing one means rebuilding the cabinetry around it.

Lines and series we service

  • Classic. Two sealed systems in one cabinet, one for the fridge and one for the freezer, so a warm fridge next to a fine freezer is a normal fault pattern and points at one system rather than both.
  • Designer. Fully integrated and flush with the cabinets behind a custom panel, so the panel and the hinge hardware come off before anything electrical is reachable.
  • PRO. Glass door and stainless interior. The door heaters and the glass seal are specific to this line and do not cross over from Classic.
  • Undercounter drawers and beverage centers. These breathe through a front grille under the counter, so most no-cooling calls on them start as a choked condenser rather than a dead compressor.
  • Wine storage. Dual zone with its own control. One zone drifting while the other holds is normally the damper or a sensor.

Pages of their own: refrigerator repair.

Viking repair

Cooking, Refrigeration

Viking-brand parts carry a real markup and some are order-only. The gas side is mechanically simple and lasts, so a professional range is worth repairing well past fifteen years.

Lines and series we service

  • Professional 5 Series. The range we see most in LA kitchens. Spark modules, sealed burner assemblies and oven igniters are the routine work.
  • Professional 7 Series. Heavier build with a different control layout, and parts cross over from the 5 Series less often than people assume.
  • Tuscany. The Italian-built range with the brass trim. Burner and valve parts are specific to it, so confirm the series before ordering anything.
  • Built-in refrigeration. A much smaller install base than the ranges, which means a door, a board or a compressor takes longer to source.

Pages of their own: oven & stove repair.

Wolf repair

Cooking

Parts cost more than a mass brand and many are ordered, but the gas hardware is conventional and stays repairable. A Wolf range with a dead igniter or a failed spark switch is a routine repair at any age.

Lines and series we service

  • Gas ranges. Dual-stacked sealed burners. A burner that won't hold a low flame is usually a cap or port problem, and steady clicking points to moisture or a spark switch.
  • Dual-fuel ranges. Gas burners on top and an electric convection oven below, so oven faults are elements, sensors and the fan rather than an igniter.
  • M Series and E Series wall ovens. Touch-control wall ovens set into cabinetry. Control boards are matched to the series, and some jobs start with sliding the oven forward.
  • Induction ranges and cooktops. The electronics carry the load here, so a dead zone traces to a coil or the power board under the glass.

Pages of their own: oven & stove repair.

Thermador repair

Cooking, Refrigeration, Dishwashers

Sits inside the same parts network as Bosch and Gaggenau, so sourcing is better than most luxury brands. Worth repairing at fifteen years, particularly anything built into cabinetry.

Lines and series we service

  • Freedom. Refrigeration columns joined into one flush run, plus the Freedom induction cooktop. A single failed column still has to come out of a joined cabinet run, so allow for the carpentry.
  • Masterpiece. The main built-in cooking series. Touch control panels and the door hinge assembly are the two parts that come back.
  • Professional, Pro Harmony and Pro Grand. Pro Harmony is the shallower cabinet-depth build and Pro Grand is not, so confirm which one is in the kitchen before ordering a door, a grate or a griddle.
  • Star burner cooktops. The star-shaped burner ports clog differently from a round burner, and a low flame on one burner is usually cleaning rather than a valve.

Pages of their own: oven & stove repair.

Cove repair

Dishwashers

A young brand with a small install base, so parts are almost always ordered. The build is heavy enough that repair is the right call on anything under a decade old.

Lines and series we service

  • Cove dishwashers. One family in two widths, panel-ready or stainless. It sits in the Sub-Zero group, so sourcing and diagnostics behave like a Sub-Zero call.

Dacor repair

Cooking, Refrigeration

Samsung has owned Dacor since 2016, so newer parts move through a large network. Anything built before that is a real sourcing problem, and it is worth checking availability before committing to the repair.

Lines and series we service

  • Modernist. The current flagship look with glass and steel fronts. Heavily board-driven, and the boards come through the Samsung side.
  • Contemporary. The volume built-in series. Wall ovens share hardware across the line, which keeps sourcing predictable.
  • Heritage. The older professional styling. Parts for pre-2016 units are the hardest sourcing job on this page, so diagnose before you promise a timeline.

Bertazzoni repair

Cooking

Italian parts arrive through the importer, so nothing here is a same-day fix. The gas hardware is simple and repairable, which is why these ranges stay in kitchens.

Lines and series we service

  • Professional Series. The chunky knobs and the thicker door. Igniters and thermocouples are the usual work, and both are cheap next to the wait for trim.
  • Master Series. The mid tier. Same Italian burner hardware underneath, simpler trim on top.
  • Heritage Series. Sold on the retro styling, and the styling pieces are the slow parts to get. Mechanical repairs are quick, cosmetic ones are not.

Monogram repair

Refrigeration, Cooking, Dishwashers

Luxury pricing with GE's parts network behind it, which is an unusually good combination to inherit. Worth repairing at fifteen years.

Lines and series we service

  • Statement Collection. The bolder trim with the heavy handles. Under the skin it is GE's built-in platform, which is the best news you can get on a luxury badge.
  • Minimalist Collection. Flush, quiet trim on the same platform. Panel-ready doors mean cabinetry work happens before appliance work.
  • Built-in refrigeration. Columns and built-in French-door cabinets whose compressors and boards cross-reference to the GE built-in line, so sourcing stays sane.
  • Professional ranges and rangetops. Igniters, spark modules and oven sensors are the repeat items, and they are priced closer to GE than to a European pro range.

Liebherr repair

Refrigeration, Wine storage

German build, US distributor parts, and a wait on anything unusual. The cabinets last, so a fifteen year old integrated column is normally worth repairing rather than forcing the cabinetry rework a replacement brings.

Lines and series we service

  • Monolith. Fully integrated columns sitting flush in the cabinet run. The door panel hangs on the appliance hinge, so panel weight matters on every door job.
  • Peak. The newer integrated line. Parts are recent and come through the US distributor, not off a local shelf.
  • BioFresh drawers. Humidity-controlled compartments. A drawer that ices up is normally the humidity control or a blocked drain rather than the sealed system.
  • Undercounter and wine cabinets. Small cabinets with front-breathing condensers that choke in an LA kitchen faster than owners expect.

Gaggenau repair

Cooking, Refrigeration

The most expensive parts on this page, and nearly all of them are ordered. Also the most over-built, so a repair on a decade-old unit is the normal outcome rather than a gamble.

Lines and series we service

  • 400 Series. The flagship, with machined metal trim. Every visible part is costly and order-only, so cosmetic damage is worth pricing before you promise a date.
  • 200 Series. The mainstream Gaggenau tier, and it shares more hardware with the Thermador side of the same group than the 400 does.
  • Vario cooktops. Modular sections dropped into a single cutout, so one dead section can be replaced on its own without touching the rest of the run.
  • Combi-steam ovens. There is a water circuit as well as an oven, and descaling history explains most of the faults we find in them.

Miele repair

Dishwashers, Laundry, Cooking, Refrigeration

Parts are expensive and usually ordered, but they still exist for old machines, which is not true of every brand here. A Miele washer at fifteen years is an ordinary repair.

Lines and series we service

  • Generation 7000. The current built-in cooking and dishwasher platform. Control boards are specific to it and do not swap in from the previous generation.
  • MasterCool. Miele built-in refrigeration. Small install base in LA, so a door, a hinge or a board is an order rather than a quick swap.
  • ProfiLine. The commercial-leaning laundry and dishwashers. Built for cycle count, so what fails is the wear parts, on schedule.
  • Miele washers and dryers. Drain pumps and door locks account for most calls, and both are straightforward jobs on a machine designed to be opened.

Pages of their own: dishwasher repair.

Mass-market brands

The machines in most LA kitchens and garages. Parts are inexpensive and quick, so the question is almost never whether we can fix it. It is whether the machine has enough years left to deserve the repair.

Samsung repair

Refrigeration, Laundry, Cooking

Parts are cheap and widely available. Control boards and sensors fail more often than anything mechanical. Past twelve years, a Samsung fridge with a sealed system fault is rarely worth the labor.

Lines and series we service

  • Family Hub. The screen is effectively a tablet on a fridge door and it fails independently of the cooling, so the display module gets quoted separately from anything in the sealed system.
  • Bespoke. Color panels come off and swap, which makes a dented door cheap to fix. A hinge over-tightened during a panel swap is a common reason a Bespoke door stops sealing.
  • 4-Door Flex. The convertible middle compartment runs on its own damper and sensor, so a drawer that will not hold temperature usually is not a compressor problem.
  • FlexWash and FlexDry. Two machines in one cabinet with separate drain paths, so the first step is finding which half has the fault, before the front panel comes off.

Pages of their own: refrigerator repair, washer repair, dryer repair.

LG repair

Refrigeration, Laundry

Good parts availability on refrigeration and laundry, and prices that make most repairs easy to justify. The linear compressor is the expensive failure, and on an older unit it is often where replacement wins.

Lines and series we service

  • InstaView. The knock-to-see glass panel adds a second seal and a light board, so condensation inside the glass is a panel assembly fault and not a cooling fault.
  • Craft Ice. The round-ice head is its own module in the door with its own mold heater, and it fails while the main ice maker keeps working.
  • Door-in-Door. Two gaskets and a second hinge set, so a door that sags is the usual reason one of these runs warm.
  • TurboWash direct drive. No belt, so a rotor or stator fault sounds exactly like a failed drum bearing. Check the hall sensor before quoting a bearing job.
  • Styler steam closet. Rare enough in LA that parts move slowly. Anything past the door gasket is an order.

Pages of their own: refrigerator repair, washer repair, dryer repair.

Bosch repair

Dishwashers, Cooking, Refrigeration

Parts are well distributed in the US and priced sensibly for a European machine. A Bosch dishwasher is usually worth repairing at eight to ten years, because the tub and the racks outlast the pump.

Lines and series we service

  • 300 Series. The volume dishwasher in LA condos. Drain pumps and the water inlet assembly are the two failures that account for most calls.
  • 500 Series. Adds the third rack and a quieter pump mount on the same platform, so diagnosis carries straight over from the 300.
  • 800 Series. Panel-ready doors are common at this tier, and the custom panel has to come off before the door springs or cables can be reached.
  • Benchmark. Top of the range, with the auto-open drying flap. The flap actuator is specific to this tier and is not shared down the line.

Pages of their own: dishwasher repair.

GE repair

Refrigeration, Laundry, Dishwashers, Cooking

Parts are everywhere and priced low, so the point where replacement beats repair sits later than most people expect.

Lines and series we service

  • Profile. The mainstream upper line. Boards, fan motors and ice maker assemblies are widely stocked, so most Profile jobs finish on the first visit.
  • Adora. A retailer-exclusive build on the standard GE platform, and parts cross-reference to the base line, which keeps the bill down.
  • GE base refrigeration and laundry. Mechanically plain and thoroughly documented. Easiest machines in this catalogue to get parts for.

Pages of their own: refrigerator repair.

KitchenAid repair

Dishwashers, Cooking, Refrigeration

Whirlpool group parts, so lead times behave like a mass brand even on the built-in units. Worth repairing well past ten years on the cooking side.

Lines and series we service

  • Built-in wall ovens. The oven and its self-clean latch come out as one assembly, so a latch failure means pulling the unit out of the cabinet rather than working through the door.
  • Panel-ready dishwashers. The custom panel and handle go on before the door springs are tensioned, so the door has to be re-weighted on reassembly or it drops open.
  • Built-in refrigeration columns. Whirlpool group hardware behind a KitchenAid badge, which makes sourcing far easier than on a true luxury column.

Whirlpool repair

Laundry, Refrigeration, Dishwashers

Lowest parts cost of anything we service. Inside twelve years it is almost always cheaper to repair than to replace.

Lines and series we service

  • Cabrio. High-efficiency top loader with no agitator. The shift actuator and the drum bearing are the two jobs, and the actuator is the cheap one to rule out first.
  • Duet. The older front-load platform. Door boots and drain pumps are still available for it, which is why these are still worth fixing.
  • Base laundry and refrigeration. Simple, documented machines sitting on the deepest parts network in the country.

Pages of their own: dryer repair.

Maytag repair

Laundry

Same parts economy as Whirlpool, because it is the same parts. Laundry is the strong side, and the kitchen line is a rebadge.

Lines and series we service

  • Bravos. The Cabrio platform under a Maytag badge, so the shift actuator and bearing jobs are identical and the parts interchange.
  • Maxima. Front loader with the steam option. Door locks and drain pumps account for most of what we see on it.
  • Commercial-grade laundry. Heavier cabinet and a longer motor warranty from the factory, but the wear parts are ordinary Whirlpool group items.

Frigidaire repair

Refrigeration, Cooking, Laundry

Parts are inexpensive and quick to get. On a unit over ten years old with a sealed system fault, replacement usually wins on cost.

Lines and series we service

  • Gallery. The mid tier. Evaporator fan motors and ice maker assemblies are the recurring items on these.
  • Professional. Pro styling on the standard chassis. The look costs more, the parts underneath do not.
  • Base line. Inexpensive machines with inexpensive parts, which is the whole argument for repairing rather than replacing them.

Siemens repair

Dishwashers, Cooking

Siemens home appliances are not sold new through US retail, so the units in LA arrived with an import or a European remodel. Parts come from overseas, so plan on a wait rather than a same-day fix.

Lines and series we service

  • iQ series. European trim tiers rather than US model families, and the fault codes read like Bosch because the platform underneath is shared.
  • studioLine. The top trim, panel-ready and fitted into cabinetry, so add cabinet time to any door or hinge job.

Café repair

Refrigeration, Cooking

GE parts pricing with a design premium on the visible pieces. Repairs behave like a mass brand right up until you need a hardware finish matched.

Lines and series we service

  • Customizable hardware. Handles and knobs come in brushed brass, copper and black, so the finish has to be ordered with the door or the kitchen comes back mismatched.
  • French-door refrigeration. GE Profile internals under different trim, so diagnosis and part numbers follow the GE side.
  • Induction ranges. One dead element is usually the coil or its thermistor rather than the whole induction board, and that difference is most of the bill.

What changes between a mass-market and a premium repair

Same symptom, same technician, very different job. Five things move, and every one of them shows up on the invoice or the calendar.

Parts lead time

A Whirlpool drain pump is a local pickup. A Gaggenau trim piece is an order through a distributor and it moves at the distributor's pace. That gap, not the labor rate, is usually what decides whether your machine runs tonight or next week.

Proprietary diagnostics

Mass-market boards throw numbered fault codes anyone can look up. Premium built-ins hide service mode behind a key sequence and report faults in the manufacturer's own shorthand. Diagnosis takes longer, and it has to be right the first time, because a wrongly ordered luxury board is an expensive thing to be wrong about.

Panel-ready doors and cabinetry

An integrated column carries your cabinet maker's panel on the appliance hinge. Before anyone touches a hinge, a door cable or a switch, that panel comes off and then gets re-hung square. On a freestanding mass-market fridge the door is just a door, and the same job is an hour shorter.

Sealed system work

Opening a sealed system means recovering the refrigerant, brazing, pulling a vacuum and recharging by weight. It is the one job where a premium cabinet earns its price, because the compressor and the insulation are worth the effort. On a ten year old mass-market fridge the same work costs more than the fridge.

Repair or replace at fifteen years

A fifteen year old Sub-Zero, Thermador or Miele is normally worth fixing. The cabinet outlasts the parts, the parts still exist, and pulling the unit drags the cabinetry with it. A fifteen year old Samsung or Frigidaire with the same fault normally is not. We tell you which one you own before we quote the work.

Independent repair service. We are not affiliated with or authorized by any manufacturer. Brand, series and product line names are the trademarks of their owners, used here to describe the equipment we work on. We source manufacturer parts for each job rather than holding brand inventory.

Same-day across Los Angeles. You approve a flat price before anything is opened.

Call nowBook online