Ice maker repair cost in Los Angeles

Most jobs $150–$400Typical $280Prices reviewed August 2026

10%

off labor

when you book online

Labor only. Parts are not discounted.

Tell us what broke

We'll call or text about this repair. Nothing else.

State registered and insured Same-day, 2-hour window Diagnostic credited

An ice maker repair in Los Angeles costs $150 to $400, and $280 is a fair middle figure. A fill tube that's frozen, or a bad inlet valve inside a fridge, keeps you low. An undercounter machine carrying a condenser and water pump of its own, sometimes an auger too, is where bills reach the top.

Biggest price swing. Refrigerator ice maker or a dedicated machine. A module, bail arm, inlet valve or optical sensor inside a fridge is contained work. A standalone unit under a bar counter is a small refrigeration system in its own cabinet, and clearance around it matters as much as the part.

Ice maker repair in LA
$150–400
Typical job
About $280. Your flat price is agreed before anything is opened.
Diagnostic
$70. It comes off the bill when you approve the repair. If you decline, it is all you pay.
Warranty
90-day parts & labor on the work we did.

Prices reviewed August 2026. You approve the flat number before anything is opened.

What changes a ice maker repair quote

We start by sorting out whether the ice comes from a fridge or a standalone machine. Then it's the water supply, the module or the dispenser drive.

  • Fridge ice maker vs standalone machine
  • Frozen fill tube or failed tube heater
  • Inlet valve or low water pressure
  • Ice maker module or optical sensor
  • Auger motor and dispenser flap
  • Scale buildup on the evaporator plate
  • Undercounter access and clearance

Typical jobs and what they cost

JobPartPart costTimeTotal
Ice maker not making iceDual water inlet valve$35-$90About an hour.$180-$300
Ice maker leaking waterNo part, adjustment or cleaning-About 45 minutes.$150-$220
Ice cubes small or hollowWater filter cartridge$30-$60About 30 minutes.$160-$230
Ice maker won't dispenseBucket auger and drive coupling$45-$120About 45 minutes.$190-$300
Ice maker frozen into one blockIce maker module$120-$260About 40 minutes to diagnose on the first visit, about 40 minutes to fit on the second.$270-$400

Typical ranges for these jobs in LA, not quotes from past invoices. Your flat price comes after the diagnostic.

What each end of the range buys

A single appliance start relay
The straightforward visit
A frozen fill tube is the usual reason the bin sits empty, and it is the quickest fix on this list. We steam the tube clear, confirm the tube heater cycles, and check pressure at the inlet valve. Then we wait through a full harvest, because an ice maker that drops one good batch and quits is a different fault from one that never filled.
A fan motor, a control board and a door gasket laid out together
The long one
Undercounter and standalone machines carry the top. Each one has its own condenser and water pump, and nugget models add an auger motor. In hard LA water the evaporator plate often needs a full descale before cubes release cleanly.

Repair the ice maker or replace it

A fridge ice maker module is worth replacing at almost any age, since the alternative is a whole new refrigerator, while a standalone machine past ten years with a failing sealed system is not worth the refrigeration work.

An ice maker that starts leaking after the fridge was moved for flooring work may not be broken, so check level before buying anything. When the mold tilts toward one corner it overflows with every fill. Leveling the cabinet costs $150 to $220 and needs no part. Standalone units get a different test, and the sealed system decides it.

Where to go next

Other appliance repair costs

Same flat-rate approach, different machine. Each guide has its own range and its own price drivers.

Ice maker repair cost: questions we get

Does a fridge ice maker cost less to fix than a standalone ice machine?

Generally, yes. Inside a fridge the work stays contained, typically one part such as the inlet valve, the module or its optical sensor. A standalone undercounter machine is a compact refrigeration unit with a cabinet of its own, a condenser and a water pump, and nugget-ice machines also carry an auger motor. Hard LA water can mean descaling its evaporator plate as well.

Why does an ice maker module replacement take two visits?

Because built-in modules are ordered, not carried on the van. On a built-in column freezer the mold heater is sealed inside the module and isn't sold on its own. The first visit finds the fault, clears the ice block and prices the job. Then the module is fitted on a return trip, in about forty minutes. Total is $270 to $400.

Why is my ice maker making small or hollow cubes?

Usually low water flow, not a freezing problem. A clogged filter lets the mold take only part of its water in the time the valve stays open. A new cartridge, an air purge and three watched harvests run $160 to $230. Change the filter on schedule and take a look at the saddle valve feeding the line.

The water dispenser works, so why isn't the ice maker filling?

Because the inlet valve has two separate coils, one for the door water and one for ice, and either can burn out alone. Water at the door proves nothing about the ice side. Swapping the dual valve runs $180 to $300, far less than an entire ice maker bought on a guess that wouldn't fix anything.

Find out what your ice maker will actually cost

The $70 diagnostic buys you the real fault and a flat number for the repair. Approve the work and it comes off the bill.

Call nowBook online