Cooktop repair cost in Los Angeles

Most jobs $130–$350Typical $240Prices reviewed August 2026

10%

off labor

when you book online

Labor only. Parts are not discounted.

Tell us what broke

We'll call or text about this repair. Nothing else.

State registered and insured Same-day, 2-hour window Diagnostic credited

Cooktop repairs in LA run $130 to $350, with $240 sitting in the middle. Gas burner work happens on top and goes quickly. Radiant elements live under the glass, and induction boards mean lifting the entire unit from the counter, so the kind of cooktop you own sets most of the price.

Biggest price swing. Gas, radiant or induction, and the three are not close. Gas burner work happens above the surface and goes quickly. On a radiant top the glass lifts or the unit comes up out of the counter before an element can be reached. Induction means lifting the whole cooktop out of the countertop, usually with two people, then resealing it or refitting the clips on the way back in.

Cooktop repair in LA
$130–350
Typical job
About $240. Your flat price is agreed before anything is opened.
Diagnostic
$70. It comes off the bill when you approve the repair. If you decline, it is all you pay.
Warranty
90-day parts & labor on the work we did.

Prices reviewed August 2026. You approve the flat number before anything is opened.

What changes a cooktop repair quote

Gas, radiant and induction price out very differently, and damaged glass is its own question. The grid shows what each one adds.

  • Gas, radiant or induction type
  • Glass top removal from the counter
  • Spark module or burner igniters
  • Induction inverter boards
  • Touch control interface board
  • Cracked or chipped glass surface
  • Cabinet access from underneath

Typical jobs and what they cost

JobPartPart costTimeTotal
Gas burner clicking but not lightingSpark electrode and lead$25-$70About an hour.$150-$240
Induction cooktop not heatingZone power board$120-$260About an hour and a half.$270-$350
Electric cooktop burner not heatingRadiant element$50-$130About an hour and a half.$190-$300
Cracked glass cooktopNo part, adjustment or cleaning-About 30 minutes.$130-$180
Uneven or yellow gas flameNo part, adjustment or cleaning-About an hour.$130-$200

Typical ranges for these jobs in LA, not quotes from past invoices. Your flat price comes after the diagnostic.

What each end of the range buys

A single appliance start relay
The straightforward visit
Clicking with no flame is the most common gas cooktop fault. It is normally a soaked or cracked spark electrode, or a clogged port in the burner cap after something boiled over. We clear the ports, dry the electrode, reseat the cap and check that every burner lights cold in a couple of seconds. A burner that still hesitates gets the spark module tested.
A fan motor, a control board and a door gasket laid out together
The long one
Induction is the expensive end. The inverter boards sit under the glass, usually one for each pair of zones, so the whole top comes out of the counter cutout before anyone reaches a connector. Touch controls that respond to nothing usually point at the user interface board, and that is a factory part with a lead time.

Repair the cooktop or replace it

Igniters, elements and spark modules are worth fixing on any cooktop still in decent shape. A cracked induction glass top plus a failed inverter board runs close to the price of a new unit, so replacement wins there.

Glass is usually where a cooktop gets retired. Replacement glass for a cracked mass-market top carries the price of a major assembly, so a new unit tends to make more sense, while premium and built-in tops need their own math. A dead radiant element is different, a $190 to $300 job, and the scorched terminal behind it gets redone too.

Where to go next

Other appliance repair costs

Same flat-rate approach, different machine. Each guide has its own range and its own price drivers.

Cooktop repair cost: questions we get

Why do gas, radiant and induction cooktop repairs cost so differently?

It comes down to where the parts sit. A gas burner is serviced from above. A radiant element is under the glass, so either the glass is lifted or the cooktop is raised first. Induction boards also sit beneath the glass, often one per pair of zones, and the entire unit is lifted from the counter, then resealed or reclipped on the way back.

Can cracked glass on a cooktop be repaired?

No. Nothing bonds cracked cooktop glass, and the cooktop should stay off from the day it cracks. The visit, $130 to $180, covers a safety check, isolating the cooktop, a quote on the replacement glass and the cutout measurements. The glass is priced separately, and on a mass-market top it can exceed what the whole unit cost new.

How much does an induction cooktop board replacement cost?

About $270 to $350 for one zone's power board, roughly 90 minutes of work, with the board itself at $120 to $260. One dead zone while three still heat points to a single power stage, not the interface. Keep the vent slot under the cooktop clear, because boards that overheat are often breathing through a slot a drawer liner has covered.

My gas burner keeps clicking but never lights. What's wrong?

Often it's not the spark module. A cracked spark electrode can short the spark to ground instead of jumping to the gas, while the module fires normally. Replacing the electrode and its lead runs $150 to $240 in about an hour. And every burner clicking at the same time is normal design on these cooktops, so that part needs no fixing.

Why are some of my gas burners burning yellow?

On one or two burners it's a cleaning job. Crusted ports, a cap sitting off its pins or debris in the venturi starve the flame of air. Clearing each port and reseating the caps runs $130 to $200 with no part. Yellow flames across all burners together, or any gas smell, means turn the cooktop off and get a technician out.

Find out what your cooktop will actually cost

The $70 diagnostic buys you the real fault and a flat number for the repair. Approve the work and it comes off the bill.

Call nowBook online